RST logo
Probe Style In-Place Digital Bus Inclinometer
Probe Style In-Place Digital Bus Inclinometer
Close-up of the Probe Style In-Place Digital Bus Inclinometer Close-up of the Probe Style In-Place Digital Bus Inclinometer

PROBE STYLE IN-PLACE DIGITAL BUS INCLINOMETER

CATEGORY > Inclinometers + Tilt Sensors

PROBE STYLE IN-PLACE DIGITAL BUS INCLINOMETER

DESCRIPTION

Standard in-place inclinometers may not be able to track in casings deformed by active ground movement. The Probe Style In-Place Digital Bus Inclinometer has tracking equal to the best standard probe inclinometers. It is designed to remotely monitor and continuously measure underground vertical movement as a result of construction and excavation and any settlement that may occur around tunnels, dams, embankments, and landfills.

In-place inclinometers consist of one or more MEMS inclinometer sensors housed in a 25 mm (1.0 in.) diametre, water-tight, stainless steel enclosure. Each sensor is separated from the next by Kevlar® cable assemblies. Cable lengths can be varied so sensors can be concentrated in areas of expected movement.

Wheel assemblies are sized to fit both 70 mm (2.75 in.) and 85 mm (3.34 in.) O.D. inclinometer casing. As movement occurs and the inclinometer casing deforms, each sensor can be automatically monitored and can be read at a remote readout location. If necessary, an alarm can be triggered when movement reaches a preset critical rate or magnitude.

APPLICATIONS

Monitoring local tilt in active boreholes.

QUICK SPECS

Tracking equal to probe inclinometer.


24 bit A/D in sensors.


High resolution and stability.


On board electronics.


Optional single cable digital BUS system.


Highly cost effective per sensor point.


Removable.


High precision, wheeled probe.


Easily adaptable to data logging.


Range of ±15° (other ranges upon request).


Resolution of ±2 arc sec. (±0.0006°) (0.01 mm/m).


Non-linearity of ±0.0125% F.S. (±0.002°) (0.03 mm/m).


Repeatability of ±0.0125% F.S. (±0.002°) (0.03 mm/m).


Sensor: MEMS (Micro-Electro-Mechanical Systems) Accelerometer.

BENEFITS

Increase Productivity


High Accuracy


High Reliability

DESCRIPTION

Standard in-place inclinometers may not be able to track in casings deformed by active ground movement. The Probe Style In-Place Digital Bus Inclinometer has tracking equal to the best standard probe inclinometers. It is designed to remotely monitor and continuously measure underground vertical movement as a result of construction and excavation and any settlement that may occur around tunnels, dams, embankments, and landfills.

In-place inclinometers consist of one or more MEMS inclinometer sensors housed in a 25 mm (1.0 in.) diametre, water-tight, stainless steel enclosure. Each sensor is separated from the next by Kevlar® cable assemblies. Cable lengths can be varied so sensors can be concentrated in areas of expected movement.

Wheel assemblies are sized to fit both 70 mm (2.75 in.) and 85 mm (3.34 in.) O.D. inclinometer casing. As movement occurs and the inclinometer casing deforms, each sensor can be automatically monitored and can be read at a remote readout location. If necessary, an alarm can be triggered when movement reaches a preset critical rate or magnitude.

QUICK SPECS

Tracking equal to probe inclinometer.


24 bit A/D in sensors.


High resolution and stability.


On board electronics.


Optional single cable digital BUS system.


Highly cost effective per sensor point.


Removable.


High precision, wheeled probe.


Easily adaptable to data logging.


Range of ±15° (other ranges upon request).


Resolution of ±2 arc sec. (±0.0006°) (0.01 mm/m).


Non-linearity of ±0.0125% F.S. (±0.002°) (0.03 mm/m).


Repeatability of ±0.0125% F.S. (±0.002°) (0.03 mm/m).


Sensor: MEMS (Micro-Electro-Mechanical Systems) Accelerometer.

APPLICATIONS

Monitoring local tilt in active boreholes.

BENEFITS

Increase Productivity


High Accuracy


High Reliability

CONTACT US

RST Instruments Ltd.

11545 Kingston Street
Maple Ridge, BC
Canada V2X 0Z5

604-540-1100

1-800-665-5599

Fax: 604-540-1005

info@rstinstruments.com

CONNECT WITH RST

Linkedin icon
Youtube icon


ASK A QUESTION

CONTACT US

RST Instruments Ltd.

11545 Kingston Street
Maple Ridge, BC
Canada V2X 0Z5

604-540-1100

1-800-665-5599

Fax: 604-540-1005

info@rstinstruments.com



CONNECT WITH RST

Linkedin icon
Youtube icon

ASK A QUESTION

Back to Top