- INCLINOMETERS + TILT SENSORS PIEZOMETERS READOUTS + DATA LOGGERS BOREHOLE PACKERS GROUT MONITORS LOAD + STRESS + PRESSURE SENSORS EXTENSOMETERS SETTLEMENT SYSTEMS ENVIRONMENTAL THERMISTORS + TEMPERATURE ANALYSIS SOFTWARE VIBRATION + OVERPRESSURE CARLSON CONCRETE INSTRUMENTS
More than half of our products are custom made. Click here to view some of our most recent customized instruments developed for geotechnical applications.
TH2016 HOST SOFTWARE and MANUAL
To download any of the files below right click on the Software Title and choose "Save Target As". Download times may vary depending on your connection speed. New to downloading? See our document for downloading to Windows by clicking here. By downloading software from the RST Instruments Web site you agree to the terms of our license agreement. Please read it here before downloading. View the brochure here.
SOFTWARE TITLE: Multi-Readout Host Software
and Manual (Version 1.09) (61MB)
> INSTALLATION NOTES:
1. Once the .zip file is downloaded, unzip the files.
2. DO NOT connect the USB cable until all software has been installed first.
3. Run the "MultiReadout_setup_1.09.exe" file and follow instructions in the "Multi Readout Host Software Instruction Manual.pdf" while installing.
SOFTWARE TITLE: TH2016 Firmware (V 1.25) (63KB)
> INSTALLATION NOTES:.
1. Using the already installed TH2016 host software, check to see if the firmware version is current, and if necessary, download, unzip and install the TH2016 firmware update as listed above.
2. Connect the TH2015 Readout to computer's USB port.
3. Turn on the TH2016 Readout.
4. Run the program "TH2016 Firmware Update V1.25.exe".
5. The correct comm port will be automatically selected.
6. Press the download button.
7. Transfer will take ~0:00:15
>> Download Current RST USB Drivers HERE