RST logo
Tilt Transmitter
Tilt Transmitter
Tilt Transmitter shown at an angle Multiple Tilt Transmitters

TILT TRANSMITTER

CATEGORY > Inclinometers + Tilt Sensors

TILT TRANSMITTER

DESCRIPTION

The MEMS Tilt Transmitter is capable of measuring 359° of tilt. It is ideal for transmitting the angle changes of sewer flaps and crane booms and in other applications where similar measurements are required.

The sensor, which is based on a triaxial accelerometer, is housed in a NEMA Type 4X, IP68 enclosure. It also conforms to the Canadian Electrical Code criteria for installations in Class I, DIV I and Class II, III Div I hazardous locations, and is CSA/FM/ATEX/IECEX approved.

The alignment of the 4 mA point and the sensing polarity can be set either in the XZ or YZ plane at time of order.

APPLICATIONS

Sewer flap angle.


Crame boom angle.


All static/quasi-static 0-359° tilt and inclination measurements.


Ideal for general, industrial, and explosion proof applications.

QUICK SPECS

Measurement in XZ or YZ plane.


Enclosure in NEMA 4X, IP66/68.


Rated for installations in CLASS I, DIV I GROUPS B, C, & D CLASS II, DIV I GROUPS E, F, & G Hazardous locations.


ATEX & IECEX: I M2, II 2GD T6 (85°), Ex d I, Ex d IIC, Ex tD A21 T85°C IP68, TA= -40°C to +85°C.


CSA/FM/ATEX/IECEX certified.


Conduit entry: 1/2 inch NPT.

BENEFITS

Increase Safety


Increase Productivity


High Accuracy


High Reliability

DESCRIPTION

The MEMS Tilt Transmitter is capable of measuring 359° of tilt. It is ideal for transmitting the angle changes of sewer flaps and crane booms and in other applications where similar measurements are required.

The sensor, which is based on a triaxial accelerometer, is housed in a NEMA Type 4X, IP68 enclosure. It also conforms to the Canadian Electrical Code criteria for installations in Class I, DIV I and Class II, III Div I hazardous locations, and is CSA/FM/ATEX/IECEX approved.

The alignment of the 4 mA point and the sensing polarity can be set either in the XZ or YZ plane at time of order.

QUICK SPECS

Measurement in XZ or YZ plane.


Enclosure in NEMA 4X, IP66/68.


Rated for installations in CLASS I, DIV I GROUPS B, C, & D CLASS II, DIV I GROUPS E, F, & G Hazardous locations.


ATEX & IECEX: I M2, II 2GD T6 (85°), Ex d I, Ex d IIC, Ex tD A21 T85°C IP68, TA= -40°C to +85°C.


CSA/FM/ATEX/IECEX certified.


Conduit entry: 1/2 inch NPT.

APPLICATIONS

Sewer flap angle.


Crame boom angle.


All static/quasi-static 0-359° tilt and inclination measurements.


Ideal for general, industrial, and explosion proof applications.

BENEFITS

Increase Safety


Increase Productivity


High Accuracy


High Reliability

CONTACT US

RST Instruments Ltd.

11545 Kingston Street
Maple Ridge, BC
Canada V2X 0Z5

604-540-1100

1-800-665-5599

Fax: 604-540-1005

info@rstinstruments.com

CONNECT WITH RST

Linkedin icon
Youtube icon


ASK A QUESTION

CONTACT US

RST Instruments Ltd.

11545 Kingston Street
Maple Ridge, BC
Canada V2X 0Z5

604-540-1100

1-800-665-5599

Fax: 604-540-1005

info@rstinstruments.com



CONNECT WITH RST

Linkedin icon
Youtube icon

ASK A QUESTION

Back to Top